Laserfiche WebLink
i 4. Infection Fluid Monitoring Data <br /> Monitoring <br /> Parameter Frequency Instrument <br /> injection rate, gpm continuous recorder <br /> injection total volume, gallons continuous totalizer <br /> injection pressure, psig continuous recorder <br /> annular pressure, psig continuous recorder <br /> injection fluid temperature continuous recorder <br /> S. Calibration of Monitoring Equipment All monitoring and <br /> recording equipment shall be calibrated on a regular <br /> basis. The permittee shall submit, to the Director, a <br /> report describing the calibration procedures and the <br /> frequency at which the equipment will be calibrated. <br /> 6. Automatic Alarms and Shut-Off Devices The permittee <br /> shall continuously operate and maintain an automatic <br /> warning system which will immediately notify the <br /> operators of a malfunction in the event that the <br /> injection pressure at the wellhead exceeds the maximum <br /> injection pressure authorized by this permit. <br /> 7 . Monitoring Information Records of any monitoring <br /> activity required under this permit shall include: <br /> (a) The date, exact place, and time of sampling or field <br /> measurements; <br /> (b) The name of the individual(s) who performed the <br /> sampling or measurements; <br /> (c) The exact sampling method(s) used to take samples; <br /> (d) The date (s) laboratory analysis were performed; <br /> (e) The name of the individual(s) who performed the* <br /> analyses; <br /> (f) The analytical techniques or methods used by <br /> laboratory personnel; and <br /> (g) The results of such analyses. <br /> 8. Recordkeepinq <br /> (a) The permittee shall retain records concerning: <br /> (i) the nature and composition of all injected <br /> i <br /> Page 12 of 29 <br /> UIC Permit #CA194000002 <br />