COMPLIANCE INFO_2000 - 2011 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page of 6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer ❑Industry Standard X Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum X Hydrostatic ❑Other(Spec) Test Equipment Used: Caldwell Level Change Indicator Equipment Resolution: .002 N Sump#1-87 Sump#2-91 Sump# Sump# Sump Diameter: 42" 42" Sump Depth: 40" 40" Sump Material: Fiberglass Fiberglass Height from Tank Top to Top of 14"Vapor 17"Vapor Highest Piping Penetration: 13"Product 13"Product Height from Tank Top to Lowest 16" 16" Electrical Penetration: Condition of sump prior to testing: Dry Dry Portion of Sump Tested' Water Level 18" Water Level 19" Does turbine shut down when sump sensor detects liquid(both Yes Yes product and water)9* Turbine shutdown response time Not Alarmed Not Alarmed Is system programmed for fail-safe Yes Yes shutdown?* Was fail-safe verified to be No No operation l?* Wait time between applying water 5 Minutes 5 Minutes and starting test: Test Start Time: 8:45 8:35 Initial Reading(RI): .001 .001 Test End Time: 9:15 9:05 Final Reading(RF): .001 .001 Test Duration: 30 Minutes 30 Minutes Change in Reading(RF-RI): 0 0 Pass/Fail Threshold or Criteria: .005/30 Minutes .005/30 Minutes Test Result: X Pass ❑Fail X Pass ❑Fail Pass ❑Fail Pass ❑Fail Was sensor removed for testing? X Yes ❑No ❑NA X Yes ❑No ❑NA Yes ❑No ❑NA Yes ❑No NA Was sensor properly replaced and X Yes ❑No ❑NA X Yes ❑No ❑NA Yes ❑No ❑NA Yes ❑No ❑NA verified functional after testing? Comments—(include infornxNion on repairs made prior to testing, and recommended follow-up forfailed tests) ' If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)