Laserfiche WebLink
SWRCB,January 2002 Page of <br /> 8. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps X <br /> Fill Riser Containment Sumps are Present,but were Not Tested <br /> Test Method Developed By: ❑Sump Manufacturer ❑Industry Standard Professional Engineer <br /> ❑Other(Spec) <br /> Test Method Used: ❑Pressure ❑Vacuum Hydrostatic <br /> ❑Other(Spec) <br /> Test Equipment Used: Equipment Resolution: <br /> Fill Sump# Fill Sump# Fill Sump# Fill Sump# <br /> Sump Diameter: <br /> —Sump Depth: <br /> Height from Tank Top to Top of <br /> —Highest Piping Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: <br /> Condition of sump prior to <br /> testing: <br /> Portion of Sump Tested <br /> —Sump Material: <br /> Wait time between applying <br /> water and starting test: <br /> Test Start Time: <br /> Initial Reading (RI): <br /> Test End Time: <br /> Final Reading RF): <br /> Test Duration: <br /> Change in Reading RF-Rl : <br /> Pass/Fail Threshold or Criteria: <br /> Test Result: Pass ❑Fail Pass ❑Fail Pass ❑Fail ❑ Pass ❑ Fail <br /> Is there a sensor in the sump? Yes ❑No Yes ❑No Yes ❑No ❑Yes No <br /> Does the sensor alarm when <br /> either product or water is Yes ❑No ❑NA Yes ❑No ❑NA Yes ❑No ❑NA ❑Yes ❑No n NA <br /> detected? <br /> Was sensor removed for testing? Yes 0 No ❑NA Yes ❑No ❑NALYe <br /> ❑No ❑NA 11 Yes El No Ll NA <br /> Was sensor properly replaced and yes ❑No ❑NA Yes ❑No ❑NA ❑No ❑NA ❑Yes ❑No ❑NA <br /> 11 verified functional after testing?. <br /> Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />