Laserfiche WebLink
I <br /> Technical Specifications 99 LD-2000 <br /> All Fuels <br /> • Gasoline, 100% methanol, 100% ethanol, up to 15% MTBE <br /> • Any combination of the above <br /> • #1 or #2 diesel, Kerosene, Jet A or JP 4 <br /> Certified to meet EPA 3 GPH @ 10 PSI: <br /> • Maximum Rigid Pipeline size: 400 ft. of 3.25 inch diameter line or up to 172 <br /> gallon volume. <br /> • Maximum Flexible Pipeline size: 415 ft. of 1 .5 inch diameter line or up to 39.5 gallon <br /> volume. <br /> U.L. listed containment housing <br /> • for pump pressures through 50 PSI. <br /> • Schedule 40 cast iron internally plated with zinc phosphate. Externally finished with <br /> oven baked powder coat <br /> Internal Housing <br /> • Hard Anodized, 6061 T6 Aluminum <br /> Check Valve <br /> • Delrin <br /> • Tygothane® - polyurethane seal <br /> Pressure Relief <br /> • Stainless Steel <br /> • 29 PSI Pressure relief (holds in addition to pump pressure relief) <br /> Seals <br /> • Piston / Poppet: Teflon, stainless steel spring energized <br /> • 0 Rings: Mil Specification; R-83248 Fluorocarbon <br /> Metering Pin and Poppet <br /> • 17-4 Stainless Steel <br /> Misc. Component Specification <br /> • 660 Bronze <br /> • 6061 T6 Aluminum <br /> • 1026 cold roll steel chrome plated <br /> Reverse Ratio Piston-Poppet <br /> One Way Poppet Flow-Path <br /> For Installation with variable or non-variable speed turbines. <br /> Vent line must be unobstructed, leak tight and connected to headspace of tank, <br /> not to be subjected to pressure or vacuum. <br /> Can be installed in submersible pump or leak detector adapter Tee. <br /> For chemical applications other than listed above, contact factory. <br /> For installation instructions or further information on the 99 LD-2000 <br /> or other line leak detection equipment, contact your local distributor or call: <br /> Vaporless Manufacturing Inc. <br /> VM) 8700 East Long Mesa Drive <br /> Prescott Valley, Arizona 86314 ; <br /> 1-800-367-0185 (520) 775-5191 Fax (520) 775-5309 <br /> `Patent application in process Made in the United States of America <br />