INSTALL_2000 - Laserfiche WebLink

Home Browse Search

OPW 60 VS SERI0S VAPOR LINE SAAR VALVES The 60VS Series is similar to the OPW 60VSPC-1001 G 60V Series of Vapor Line Shear "Vapor Saver with Valves.They are designed to break Containment Threads" at the shear groove in the event the dispenser is dislodged,helping to pre- Same features as the 60VSP-1000 plus; vent damage to underground piping. Externally threaded on outlet However the 60VS Series has addition- end for secondary containment al features not found in the 60V Series. connection of underground piping E The 60VS Series has a 1"connection at the inlet for dispenser piping and an 11/2" at the outlet end to accommodate Materials I lh" underground vapor lines. An air Body:cast iron test port is also included to give access Discs:M-19 to the vapor lines without breaking Inlet thread size: 1"NPT internal threads pipe joints. At the dispenser inlet end, Outlet thread size: 11/2"internal threads + two connections are available(offering a convenience of choice for installa- Ordering Specifications tions). A connection through the top of Product No. Length the valve or the side may be made. A plug is shipped with the valve in order 60VS-1000 631/32° 177 to plug off the opening not used. 60VSP-1001 631/32" 177 The mounting connection,below the 60VSK-1001 631/32' 177 shear groove,has three drilled and tapped holes for mounting to a stabiliz- er bar. All 60V and 60VS models have the all important mounting connection Dimensions A D above the shear groove as well. - Mounting above the shear groove is A 1111/32" 34 important on vapor lines because of the B 631/3x" 177 use of flexible pipe above this point. The shear section must be isolated so C 211/16" 68 that it is the weak point in the line. 0 11/2" 38 T E 227/32' 73 F OPW 60VS-1000 F 111/16' 43 "Line Saver" G 215/16' 75 Same features as the 60V-1000 plus; B ♦ l lh"connection to underground Piping ♦ Air test port to enable vapor line testing without breaking pipe connections ♦ Choice of top or side inlet connection ♦ Stabilizer mounting connection IMPORTANT: OPW products should be used in com- OP W 60V SP-1001 pliance with applicable federal,state and local laws and regulations. Product selection should be based on "Vapor Saver" physical specifications and limitations and compatibility with the environment and materials to be handled. Same features as the 60VS-1000 plus; OPW MAKES NO WARRANTY OF FITNESS FOR ♦ Double-poppeted design helps A PARTICULAR USE. All illustrations and specifica- tions in this literature are based on the latest product p vapor p information available at the time of publication.OPW dispenser is toppled NOWreserves the right to make changes at any time in prices, materials,specifications and models and to discontinue models without notice or obligation.