Laserfiche WebLink
This manual covers the installation INTRODUCTION <br /> procedures for RED THREAD II IMPORTANT NOTE ON ULC LISTING <br /> and RED THREAD IIA pipe, RED <br /> THREAD II fittings, and RED This manual can be used as a reference when installing Smith <br /> THREAD II secondary contain- Fiberglass Products ULC Listed piping systems. Please note the <br /> ment fittings (for product and following products which are currently ULC Listed: <br /> secondary containment piping - DS-7000 series adhesive kits for Petroleum Products <br /> systems). - 2°-4" (51-102 mm) RED THREAD II Pipe and Fittings for Petro- <br /> Part One details installation leum Products <br /> procedures for 2", 3", and 4" (51, - 3"&4" (76& 102 mm) RED THREAD II Secondary Containment <br /> 76, and 102 mm) diameter prim- Fittings for Petroleum Products <br /> ary product piping. Please note the following products which are not currently ULC <br /> Part Two covers installation Listed: <br /> procedures for 3", 4",and 6"(')(76, - DS-8000 series adhesive kits for petroleum,alcohol, or alcohol- <br /> 102, and 152 mm) diameter gasoline mixtures. <br /> secondary containment piping. - RED THREAD IIA pipe for petroleum, alcohol, or alcohol- <br /> (1)6"(152 mm)secondary containment piping is not gasoline mixtures. <br /> UL Listed. <br /> It is the policy of Smith Fiberglass Products to improve its products <br /> continually. In accordance with that policy, the right is reserved to <br /> ® make changes in specifications,descriptions and illustrative material <br /> contained in this manual as conditions warrant. The information <br /> contained herein is general in nature and is not intended to express <br /> any warranty of any type whatsoever nor shall any be implied. <br /> SAFETY <br /> This safety alert symbol indicates an important <br /> safety message. When you see this symbol, be <br /> • alert to the possibility of personal injury. • <br /> CAUTION <br /> ' As this pipe may carry hazardous material and/or operate at a hazardous pressure level, <br /> you must follow the instructions in this manual to avoid serious personal injury or <br /> property damage. In addition, installers should read and follow all cautions and warnings on <br /> adhesive kits, chemical heat packs, etc. to avoid personal injury. Observe general safety <br /> practices with all saws,tools,and other equipment to avoid personal injury.Wear protective <br /> clothing when necessary. Make sure work areas are clean, stable,and properly vented. PAY <br /> PARTICULAR ATTENTION TO SECTION 7 ON TESTING. <br /> 3 <br />