ARCHIVED REPORTS_XR0007416 - Laserfiche WebLink

Home Browse Search

KEY TO ABBREVIATIONS and METHOD REFERENCES • < : Less than; When appearing in results colurm indicates analyte not detected at the value following. This datum supercedes the listed Reporting Limit. 1 . Reporting Limits are a function of the dilution factor for arty given sarple. To obtain the actual reporting limits for this sarrple, multiply the stated Reporting Limits by the dilution factor (but do not rrultiply reported values). ICVS : Initial Calibration Verification Standard (External Standard). mean : Average; sum of measurements divided by niter of measuranents. n9/Kg (ppm) : Concentration in units of milligrams of analyte per kilogram of sarrple, wet-weighrt basis (parts per million). rrg/L : Concentration in units of milligrams of analyte per liter of sarple. mU Uhr : Milliliters per liter per hour. MPN/100 mL : Most probable niter of bacteria per one hundred milliliters of sarple. N/A : Not applicable. NA : Not analyzed. ND : Not detected; the analyte concentration is less than applicable listed reporting limit. NTU : Nephelanetric turbidity units. RPD Relative percent difference, 100 [Value 1 - Value 21/mean value. SNA Standard not available. ug/Kg (ppb) : Concentration in snits of micrograms of analyte per kilogram of sarrple, wet-eight basis (P-i is per bi1iion). ' ug/L : Concentration in units of microgram of analyte per liter of sample. urtios/an : Micrafts per centimeter. Method References 1 Methods 100 throe 493: see "Methods for Chem cal Analysis of Water & Wastes", U.S. EPA, 600/4-79-020, rev. 1983. Methods 601 throe 625: see "Guidelines Establishing Test Procedures for the Analysis of Pollutants" U.S. EPA, 40 CFR, Part 136, rev. 1988. Methods 1000 throe 9999: see "Test Methods for Evaluating Solid Waste", U.S. EPA SW-846, 3rd edition, 1986. SM: see "Standard Methods for the Examination of Water & Wastewater, 16th Edition, APHA, 1985.