Laserfiche WebLink
I <br /> Sparger Analytical Laboratory Division <br /> 0 Mobile Laboratory Division <br /> Techno yInc. Scientific Division <br /> With Automation in Mind <br />, L <br /> LI Sample Description <br /> See attached Samples Description Information. <br /> The samples were received under chain-of-custody. <br /> II AnalysisRequest <br /> The following analytical tests were requested: <br /> Lab ID Your ID Analysis Description <br /> ST95-07-2393A STACK TPHgas & BTEX <br /> ST95-07-2394A INLET TPHgas & BTEX <br /> LIII Quality Control <br /> A. Project Specific QC. No project specific QC (i.e., spikes and/or <br /> L duplicates) was requested. <br /> B. Method Blank Results. A method blank is a laboratory-generated <br /> Lsample which assesses the degree to which laboratory operations and <br /> procedures cause false-positive analytical results for your sample. <br /> LNo target parameters were detected in the method blank associated with <br /> your sample at the reporting limit levels noted on the data sheets in the <br /> LAnalytical Results section. <br /> % recovery = (measured concentration) x 100 <br /> L (actual concentration) <br /> IV Analysis Results <br /> L. Results are on the attached data sheets. <br /> 3050 Fite Circle, Suite 112 • Sacramento, California 95827 • (916) 362-8947 • FAX (916) 362-0947 <br />