Laserfiche WebLink
Woodbridge Design Guidehims <br /> Chapter 5-Woodbridge Design Guidelines <br /> SECTION 5.3 <br /> SIGNS <br /> 5.3.1 Sign Types and Designs: <br /> Sign copy changes are exempt from permit and design review requirements. <br /> The following is a list of historic sign types which may be permitted for non- <br /> residential development within the District: <br /> Building-attached Signs: <br /> Building-attached signs shall compliment,rather than compete <br /> with, the architectural features and overall facade composition of <br /> the building. Such signs should be proportional to the building so <br /> as not to dominate the appearance. Sign graphics, materials, and <br /> finish should be compatible with the historic period of the <br /> corresponding building design and detailing. Lettering style <br /> should be appropriate to the building design and era of <br /> construction. The following building-attached signs are permitted <br /> pursuant to other provisions listed herein and applicable <br /> Development Title standards: <br /> • Wall Signs. Wall sign means a sign painted on, or attached <br /> parallel to, a building wall (See Figure 19). <br /> • Projecting Signs. Projecting sign means a sign which is <br /> attached to and projects from a building wall (See Figure 20). <br /> • Canopy Signs. Canopy signs are usually applied to an awning <br /> or canopy fascia for permanent business identification (See <br /> Figure 21). <br /> • Under-Canopy Signs. Under-canopy signs hang from the <br /> underside of a canopy or awning over the sidewalk or building <br /> entrance (See Figure 22). <br /> Freestanding Signs: <br /> Freestanding signs are not in keeping with the historic <br /> development of Woodbridge. However, newer developments in <br /> the District have incorporated freestanding signs in cases where the <br /> building is set back from the street. When used, freestanding signs <br /> should be designed to compliment the architectural style of the <br /> primary building(s) and should be small in scale and incorporated <br />