COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

INTRODUCTION The purpose of this Health and Safety Plan (HASP) is to define on-site health and safety roles , health and safety procedures , and discuss chemical and physical hazards , and electrical safety issues which may be encountered at the project . The elements of the HASP include procedures for personnel protection equipment safety , medical surveillance, air quality monitoring, and general safe work practices . This plan also details the proper emergency procedures , including emergency response and first-aid capabilities . Compliance with this HASP is required of all workers and third parties who enter the sites while the above work is in progress . Tait clients may suggest or require adherence to their company HASP . Tait employees shall adhere to the more stringent procedures in either case or the required procedures by Cal/OSHA or other Federal mandated safety orders . SCOPE OF WORK Saw cut and remove existing waste oil spill bucket. Install new EDGE 1 , 5 Gallon single walled spill bucket and straight drop tube ENVIRONMENTAL PROTECTION PLAN It is important to protect the surrounding environment as it exists around the work area involved . All trees , plants , and shrubs close to the work area will be barricaded if necessary to reduce the risk of damage from construction debris and equipment. All efforts will be made to insure protection of natural resources within the boundaries of the project and within the work area . All demolition will be limited to the designated work area. Dust control measures , in the form of water spray , will be used to prevent dust migration from the excavation site . This is a generally accepted procedure by all Governing Agencies . Generated hazardous waste will be handled and disposed of in Compliance with the following; 40 CFR 260 , 40 CFR 261 , 40 CFR 262 , 40 CFR 263 , CFR 1910 , Title 22 Division 4 , Title 23 , Cal OSHA , and Cal Haz-Mat Enforcement and Liability . HEALTH AND SAFETY PERSONNEL INTRODUCTION The following sections briefly describe the Health and Safety Personnel, and general responsibilities , which will be employed during the project.