Laserfiche WebLink
TM07-SOS-2-E <br /> 0 Omega-paK/Plus Scope of Supply 07.09.01 2of2 <br /> Maintenance Indicator: A pop-up dirty filter indicator is mounted to the inlet <br /> filter silencer for notification of dirty filter. <br /> Discharqe Silencer: Absorption type silencer with an integral pulsation <br /> dampener mounted directly to the blower discharge port. The combination <br /> silencer and pulsation dampener minimizes noise and prevents pipe <br /> resonance. <br /> Pressure Relief Valve: Model 337 Kunkle spring-loaded relief valves are to <br /> mounted in the discharge line for pressure, suction line for vacuum. T-style <br /> spool pieces will be made available for valve mounting. <br /> Compensator: For easy hook-up to system piping, a flexible rubber <br /> compensator sleeve is provided. It is to be connected after the spool piece <br /> and comes complete with clamps to connect to piping. Its purpose is to <br /> accommodate slight blower discharge to system piping misalignments and <br /> vibration absorption. <br /> Liftinq Lugs and Transport Provisions: Blower and Motor are supplied with <br /> lifting lugs, while the base incorporates integral lifting/transporting provisions. <br /> OPTIONAL ACCESSORIES <br /> Sound Enclosure: The optional enclosure encases the entire package and has inlet <br /> and discharge openings allowing for proper ventilation. The sound enclosure has <br /> two (2) easy open/lock maintenance doors located for access to maintenance areas <br /> and an integral ventilation fan to insure proper cooling. If mounted outdoors, the <br /> enclosures should be under roof to protect against snow loads and ventilation <br /> blockage. <br /> Check Valve: A Check Valve can be provided as an option complete with bolts and <br /> gaskets. To be mounted after relief valve. <br /> Pressure Gauge: A pressure gauge can be provided as an option and can be <br /> mounted on the blower base frame or in the panel of the sound enclosure for easy <br /> visual inspection. <br /> Temperature Gauge: A temperature gauge can be provided as an option and can <br /> be mounted on the blower base frame or in the panel of the sound enclosure for <br /> easy visual inspection. <br /> Butterfly Valve: Butterfly valves can be provided as an option. <br /> Appendix-iii-18 of 40 08/17/07 <br />