Laserfiche WebLink
12 <br /> MEDICAL SURVEILLANCE REQUIREMENTS <br /> Medical surveillance is conducted as a routine program for field staff which meets the <br /> requirements of 29 CFR 1910.120 (f) and 8 CCR 5192 (f). This program includes baseline <br /> medical examinations for field work certification and annual follow-up examinations. Special <br /> medial tests or examinations are not anticipated for field personnel assigned to this project. The <br /> medial surveillance program is conducted under the guidance of an occupational medicine <br /> physician who established the medical exam protocol and certification requirements. <br /> All subcontractor personnel directly involved with the field work must also meet the medical <br /> surveillance requirements of 29 CFR 1910.120 and 8 CCR 5192. <br /> SITE CONTROL MEASURES <br /> This section describes the general facilities and site-specific control measures for this project. <br /> The potential chemical and physical hazards have been identified in this SSHP; however, should <br /> unexpected conditions arise, the SSO will stop all work at the site and notify the PM and HSD. <br /> Work will not resume until the SSHP and working conditions have been reevaluated and the <br /> SSHP revised accordingly. <br /> Work zones including exclusion area, decontamination area, and support area, will be established <br /> at each site based on work activities, site access, and wind direction. <br /> Communication between field team members will be verbal. <br /> A map of each site in the BC - ARCO Northern California Program is included as Appendix B. <br /> The nearest medical assistance for each site is detailed in Appendix C. <br /> Work Practices <br /> Safe work practices are part of assuring a safe and healthful working environment- These <br /> practices are standardized for all field activities, and it is the responsibility of BC employees to <br /> follow safe work practices when conducting field activities. Safe work practices to be employed <br /> during the entire progress of field work are as follows: <br /> L Set up, assemble, and check out all equipment for integrity and proper function prior to <br /> starting work activities. ZZ <br /> 2. Do not use faulty or suspect equipment. <br /> 3. Use only new and intact protective clothing. Change the suit, gloves, etc. if they tear. <br /> 4. Do not use hands to wipe sweat away from face. Use a clean towel or paper towels. <br /> OM"AE1901 TMISCUKORTHARC•O <br /> QMSSPS'w'40 <br />