Laserfiche WebLink
Page 5/11 <br /> Safety Data Sheet (SDS) <br /> OSHA HazCom Standard 29 CFR 1910.1200fg)and GHS Rev 03. <br /> Issue date 01/11/2018 Reviewed on 01/11/2018 <br /> Trade name:Aluminum Etch <br /> resistance of the glove material cannot be calculated in advance and has therefore to be checked prior to the <br /> application. <br /> penetration time of glove material: <br /> The exact break-through time has to be determined and observed by the manufacturer of the protective <br /> gloves. <br /> Eye protection: <br /> ® Tightly sealed goggles <br /> Body protection: <br /> © Protective work clothing <br /> 9 Physical and Chemical Properties <br /> Information on basic physical and chemical properties <br /> General Information <br /> Appearance: <br /> Form: Powder <br /> Color: Orange <br /> Odor: Odorless <br /> Odor threshold: Not determined. <br /> pH-value: >12.5 <br /> Change In condition <br /> Malting point/Meldng range: Not determined. <br /> Boiling point/Boiling range: 11,390 -C (x33.8 F) <br /> Flash point: None <br /> Flammability(solid,gaseous): Not applicable. <br /> Ignition temperature: Not applicable <br /> Decomposition temperature: Not determined. <br /> Auto igniting: Product is not self-igniting. <br /> Danger of explosion: Product does not present an explosion hazard. <br /> Explosion limits: <br /> Lower: Not determined. <br /> Upper: Not determined. <br /> Vapor pressure @ 800 `C(1,472 F): 53.5 hPa (52.6 mm Hg) <br /> Density: <br /> Relative density: Not determined. <br /> Vapor density: Not determined. <br /> Evaporation rate: Not determined. <br /> Solubility in/Miscibility with: <br /> Water: Not miscible or difficult to mix. <br /> (Gond.on page 6) <br />