Laserfiche WebLink
05 March 2008 <br /> AGE-NC Project No. 97-0327 <br /> Page 2 of 2 <br /> to the desired depth(i.e. 95 feet bsg). Soil parameters such as cone bearing, sleeve friction, friction <br /> ratio and pore water pressure will be measured and recorded as a cone penetrometer is advanced to <br /> ,$ lZinseate generated during drilling activities will be containerized in properly labeled DOT- i <br /> approved 55-gallon drums, and store&on-site in an area lacking public access. Based on CPT <br /> lithologic findings, discrete grab water samples will be collected in selected saturated intervals of <br /> porous and permeable material. A HydroPunch sample tool will be pushed into the specified zone, <br /> then withdrawn approximately three feet to expose an inlet screen.The interior of the sampling tool <br /> f lls with water and a 1-inch outer diameter(O.D.)stainless steel bailer will be lowered and utilized <br /> to extract a ground water sample. <br /> All other procedures will be followed as described in the above referenced work plan addendum. If <br /> you have any questions or comments,please contact the undersigned at(209)467-1006. <br /> Sincerely, <br /> j <br /> I� <br /> Advanced GeoEnvironmental,Inc. <br /> Timothy J. uellar <br /> Project Geologist <br /> enclosure <br /> CC' Mr. Jim Barton, California Regional Water Quality Control Board-Central Valley Region <br /> Mr. Rick Grewal, Grewal's Market <br />