COMPLIANCE INFO_2019 - Laserfiche WebLink

Home Browse Search

DOT PACKING GROUP CLASSIFICATION Organic peroxide that does not detonate,deflagrates slowly,and shows no violent effect if 5.2 II D heated when confined;or Organic peroxide that does not detonate or deflagrate,and shows medium effect when 5.2 II D heated under confinement. Organic peroxide which neither detonates nor deflagrates and shows low,or no,effect 5.2 II E when heated under confinement. Organic peroxide which will not detonate in a cavitated state,does not deflagrate,shows 5.2 II F only a low,or no,effect if heated when confined,and has low,or no,explosive power. Oral toxicity Dermal toxicity Inhalation toxicity by dusts LD50(mg/kg) LD50(mg/kg) and mists LC50(mg/L) Liquids& <=5.0 <=50 <=0.2 6.1 1 Solids Liquids& 6.1 II Solids >5.0and<=50 >50and<=200 >0.2and<=2.0 Liquids& 6.1 III Solids >50 and<=300 >200 and<=1000 >2.0 and<=4.0 Vapor Concentration(saturated vapor conc in air at 20C and std atmospheric pressure) and toxicity 6.1 1 A Liquid V>=500 LC50 and LC50<=200 mL/m3 V>=10 LC50; LC50<=1000 mL/m3;and the criteria for Packing Group I, Hazard Zone A are 6.1 1 B Liquid not met. V>=LC50; LC50<=3000 mL/m3;and the criteria for Packing Group I, Hazard Zone B are not 6.1 II met. 6.1 III V>=0.2 LC50; LC50<=5000 mL/m3; and the criteria for Packing Groups I and 11,are not met. Materials that cause full thickness destruction of intact skin tissue within an observation 8 1 period of up to 60 minutes starting after the exposure time of three minutes or less. Materials that cause full thickness destruction of intact skin tissue within an observation period of up to 14 days starting after the exposure time of more than three minutes but not 8 II more than 60 minutes. Materials that cause full thickness destruction of intact skin tissue within an observation period of up to 14 days starting after the exposure time of more than 60 minutes but not 8 111 more than 4 hours;or Materials that do not cause full thickness destruction of intact skin tissue but exhibit a corrosion on either steel or aluminum surfaces exceeding 6.25 mm (0.25 inch)a year at a 8 III test temperature of 55C(130F)when tested on both materials.