Laserfiche WebLink
Site Safety Plan Working To Restore Nature <br /> Unocal Station No 6981, Stockton, Califorma <br /> C) In the event the face piece cannot be adjusted so there is no leakage, <br /> DO NOT ENTER THE AREA REQUIRING PROTECTION Due <br /> to your particular facial features, a different style or size face piece <br /> may be required to obtain a proper facial fit <br /> Note Failure to perform a qualitative fit test of the respirator each time the <br /> respirator is donned may result in little or no respiratory protection <br /> Inspection, Cleaning, and Storage <br /> The respirator should be inspected, cleaned, and properly stored after use each day The <br /> following steps are the basic elements of each procedure <br /> A Inspection <br /> 1 Examine face seal for rips, tears, holes, deformation, or stiffness <br /> E <br /> 2 Examine face piece plastic center shell for cracks, massing components, or <br /> damaged threads <br /> 3 Examine harness for breaks, cuts, frays, tears, and missing or damaged <br /> hardware <br /> 4 Examine inhalation and exhalation valves and valve seats for cuts, cracks, or <br /> foreign matter which may not allow the valve to close completely Check that <br /> valves are properly installed and are not distorted <br /> 5 Examine cartridges for signs of abuse or damage Discard damaged items <br /> 6 Any respirator malfunction or deficiencies noted must be reported to the <br /> Health and Safety Coordinator or Branch Safety Officer who will issue a new <br /> respirator or correct the deficiencies using only approved spare parts from the <br /> manufacturer of the specific model in need of repair Spare parts from any <br /> other manufacturer may not be used under any conditions Instructions in the <br /> manual provided by the manufacturer should be followed when the respirator <br /> needs repairing or replacing <br /> 3W32-93s 11 <br />