ARCHIVED REPORTS_XR0012194 - Laserfiche WebLink

Home Browse Search

GR Field Methods and Procedures Field Screeninia of Soil Sam les A PID is used to perform head-space analysts in the field for the presence of organic vapors from the soil sample This test procedure involves removing some soil from one of the sample tubes not retained for chemical analysis and immediately covering the end of the tube with a plastic cap The PID probe is inserted into the headspace inside the tube through a hole in the plastic cap Head-space screening results are recorded on the boring log Head-space screening procedures are performed and results recorded as reconnaissance data GR does not consider field screening techniques to be verification of the presence or absence of hydrocarbons Construction of Monitoring Wells Monitoring wells are constructed in the exploratory soil borings with Schedule 40 polyvinyl chloride(PVC)casing All joints are thread joined, no glues,cements,or solvents are used in well construction The screened interval is constructed of machine-slotted PVC well screen which generally extends from the total well depth to a point above the groundwater An appropriately-sized sorted sand is placed in the annular space adjacent to the entire screened . interval A bentonite transition seal is placed in the annular space above the sand, and the remaining annular space is sealed with neat cement or cement grout Wellheads are protected with water-resistant traffic-rated vault boxes placed flush with the ground surface The top of the well casing is sealed with a locking waterproof cap A lock is placed on the well cap to prevent vandalism and unintentional introduction of materials into the well Measurement of Water Levels The top of the newly-installed well casing is surveyed by a California-licensed Land Surveyor to mean sea level (MSL) Depth-to-groundwater in the well is measured from the top of the well casing with an electronic water-level indicator Depth-to-groundwater is measured to the nearest 0 01-foot, and referenced to MSL Well Development and Sam lin The purpose of well development is to improve hydraulic communication between the well and the surrounding aquifer Prior to development, each well is monitored for the presence of floating product and the depth-to-water is recorded Wells are then developed by alternately surging the well with a vented surge block, then purging the well with a pump or bailer to A-2