Laserfiche WebLink
ATTACHMENT A -2- <br /> APPLICATION REQUIREMENTS <br /> GENERAL ORDER FOR DISCHARGE OF <br /> GROUND WATER FROM CLEANUP OF <br /> PETROLEUM FUEL POLLUTION <br /> TO SURFACE WATERS <br /> b. Aromatic volatile hydrocarbons (EPA Method 602 or 8020) <br /> c. Total Petroleum Hydrocarbons in the Gasoline and Diesel ranges <br /> (3550 GCFID) . Additional or alternative TPH analyses may be <br /> required if the suspected pollutants contain hydrocarbon fractions <br /> outside the range of these tests <br /> d. Lead, soluble lead or tetraethyl lead (Graphite Furnace AA or <br /> equivalent) <br /> e. Chlorinated pesticides (EPA Method 608 or 8080) <br /> f. General mineral analysis, including electrical conductivity, total <br /> dissolved solids, chloride, sulfate, nitrate and pH. <br /> B. Site hydrogeology <br /> I. Depth to ground water, including seasonal variations, if known. <br /> 2. Direction and gradient of ground water flow, if known. <br /> 3. Vertical and lateral extent of pollution, if known, including details <br /> on the location, construction, and analytical results from ground water <br /> monitoring wells used to define the plume. (Note: Full definition of <br /> the plume is not a necessary condition for compliance with this Order. ) <br /> 4. A statement on the potential impact of the wastewater discharge on the <br /> containment and rate of movement of the ground water plume. <br /> 5. Effects of the extraction system on the ground water gradient and the <br /> plume. <br /> 6. An estimate of the anticipated length the time extraction will be <br /> needed. <br /> C. Receiving Water <br /> I. Description of the receiving waters including general flow conditions, <br /> beneficial uses, aquatic resources, and downstream water Users. <br />