Laserfiche WebLink
B Field Operations Work Area <br /> Work areas (zones) will be established based on anticipated contamination Within these <br /> zones prescribed operations will occur utilizing appropriate personal protective equipment <br /> The planned zones are <br /> I Exclusion Area (contaminated) The actual areas where work is being performed <br /> are considered to be the exclusion areas Access to these areas will be <br /> strictly limited to the personnel needed to conduct the work being <br /> performed <br /> 2 Contamination Reduction Area An area near to each active work zone will be <br /> designated as the contamination reduction area Disposable protective gear <br /> will be removed and placed in garbage bags prior to leaving the reduction <br /> zone Heavy equipment and non-disposable gear will be cleaned at a <br /> decontamination area within this zone <br /> 3 Support Area (non-contaminated) Areas located away from active work areas <br /> and out of the zone of potential impact of hazards will be used for staging <br /> and support of the work being performed on site Any materials, <br /> equipment, or clothing of personnel must be fully decontaminated prior to <br /> entering these areas <br /> 8.0 DECONTAMINATION )PROCEDURES <br /> As part of the system to prevent or reduce the physical transfer of contaminants by people <br /> and/or equipment from on-site, procedures will be instituted for decontaminating anything <br /> leaving the Exclusion Area and Contamination Reduction Area These procedures include the <br /> decontamination of personnel, protective equipment, monitoring equipment, clean-up <br /> equipment, etc In cases where the Contamination Reduction Zone is not directly adjacent to <br /> the Exclusion Area, gross decontamination will occur in the Exclusion Area, followed by <br /> more detailed cleaning in the Reduction Area This gross decontamination will be performed <br /> to the extent necessary to keep contaminants from spreading to other "clean" areas of the site <br /> In general, decontamination at the site consists of rinsing equipment, personnel, etc , with <br /> copious amounts of water and washing with detergent water solutions The spent solution, <br /> brushes, sponges, containers, stands, etc , used in the decontamination process must be prop- <br /> erly disposed <br /> i <br /> 9110081A/SSP 9 December 22 1997 <br />