Laserfiche WebLink
iI. <br /> U <br /> liqui-nox solution (1%) <br /> Step 5 - Protective Coverall Re moval: (Optional - will be used at the Site Health and <br /> Safety Coordinator's discretion) With the assistance of a helper, remove protective <br /> coverall. Deposit in container with plastic liner. <br /> Equipment: container (30-50 gallons) <br /> folding chairs <br /> plastic liners <br /> Step 6 - Respirator Removal: (Optional - will be used at the Site Health and Safety <br /> Coordinator's discretion) Remove facepiece. Avoid touching face with gloves.'I If work <br /> is completed for the day, discard cartridges in lined container, and wash and rinse <br /> respirator following the procedures on page B-5. <br /> Equipment: container (30-50 gallons) <br /> plastic liners <br /> Step 7 - Inner Glove Removal: (Optional -will be used at the Site Health an'd Safety <br /> Coordinator's discretion) Remove inner gloves and deposit in container with plastic <br /> liner. <br />{ Equipment: container(20-30 gallons) <br /> plastic liners <br />{' 14. Respirators will be cleaned daily by hand washing with MSA cleaner-sanitizer'solution <br /> followed by a thorough rinse and air drying. NEVER ALLOW A RESPIRATOR TO DRY <br /> WITH THE STRAPS PLACED FORWARD ACROSS THE FACESHIELD BECAUSE THIS <br /> MAY CAUSE CHANGES IN THE FACE-TO-FACE RESPIRATOR SEAL SURFACE. The <br /> specific procedures to be employed are as follows: <br /> A. Remove all cartridges (canisters) and filters plus gaskets and seals not <br /> permanently affixed to their seats. <br /> J B. Loosen harness adjustment straps. <br /> C. Remove exhalation valve cover. <br /> D. Remove inhalation and exhalation valves. <br /> E. Remove protective faceshield co er. <br /> F Wash facepiece in MSA cleaner/sanitizer powder mixed with warm water, <br /> Avalon Environmental Consultants 9627-001-6 <br /> Kashmar Singh Joes Truck Plaza <br /> January 9, 2001 Lathrop,California <br />