COMPLIANCE INFO_2020 - Laserfiche WebLink

Home Browse Search

J & L Markel, Diesel Tank (Facilitiv 11863), STI-SP001 , Febr•irur•>> 2020 Disclaimer The information referenced in this engineering report is based solely upon the area or areas agreed upon and contracted for inspection on the date of the inspection and under those present, known , same , and current conditions . This report was prepared using retrievable data from those areas that were properly cleaned and prepared and made available and accessible during the inspection . Areas not contracted for inspection and areas that were not cleaned and made available and accessible are not ' included in this report . The methods , standards and regulations used by Pacific Engineering & Consulting during the inspection and in preparing this engineering report comply with the most current and widely accepted standards and regulations in the industry, in which these standards and regulations make no representation , warranty or guarantee . The professional opinions and recommendations stated in this report , including predictability of life , maximum length of time for re- inspection , suitability for product storage , and safe fill height are conclusive approximations and are intended to serve mainly as guidelines for obtaining the utmost in spill prevention and environmental protection . The listed recommendations may not necessarily be mandatory actions , but corrective actions that Pacific Engineering & Consulting suggests would better preserve the owners ' /operators ' facility components and may contribute to a safer and more convenient operation . Failure to comply with these could result in , but may not be limited to , reduction of service line , tank mishap , legal consequences and/or fines for owners/operators . It is best advised that the recommended repairs , corrective actions and procedures be fully and accurately complied with in order to meet the required and applicable federal , state and local regulations , and to have the necessary repairs and upgrades performed prior to making any change in service , product and/or current conditions . Some recommendations and requirements are necessary to bring the components) into compliance with federal , state, and local regulations . Pacific Engineering & Consulting recommends re- inspection after any corrective action , repair or change in usage when the change is to a more severe service . Any change in facility conditions that are applicable to this inspection report , such as , but not limited to , a change in service or usage could result in outdating this report . The predictability of any component in this report is a result of following the procedures in the applicable industry standard . Pacific Engineering & Consulting accepts absolutely no responsibility or liability for any mishap or failure , including any subsequent E clean - up costs or legal ramifications , resulting from owners ' /operators ' failure to perform the required repairs , inspections and re- inspections , as they apply . t I r I