COMPLIANCE INFO_2005 - 2012 - Laserfiche WebLink

Home Browse Search

Veeder-Root Sensor Application Guide Single-Point Mini Hydrostatic Sensor for Double Wall Sumps The Single-Point Mini Hydrostatic sensor accurately detects fluid level change in the interstice reservoir of a dou- ble-wall sump. If a leak occurs in the sump interstice,the brine seeps out of the reservoir triggering a low level alarm. Sensor Detection Capabilities - Alarm Conditions • A leak in the inner or outer sump wall triggers a Fuel alarm. • An open sensor triggers a Sensor Out alarm. Operating Capabilities • Operating temperature Range:-25°C to+50°C. Rests in salt brine solution of up to 30%calcium chloride or propylene glycol. • Storage Temperature Range:-40°C to+60°C. • Dimensions:2.5"high, 1.50"diameter • Cable length:8 feet Sensor Interface Module • TLS-350 series consoles (except TLS-350J)- Interstitial/Liquid Sensor Interface Module(P/N 329358-001) accepts up to 8 sensors(a maximum of 64 sensors could be monitored by the console). • TLS-350J console-4 sensors max. • TLS-3001, PC-300i,TLS-300C,TLS-300J, PC-300C consoles(no Interface Module required)-8 sensors max. • TLS-450- USM(P/N 332812-001)accepts up to 16 sensors Console Software Compatibility • TLS-350 series/TLS-300(Version 1 or later) • TLS-450(All) Sensor and Installation Kit • Single-Point Mini Hydrostatic Sensor and install kit for double-wall sum s-P/N 794380-304 Related Sales Literature Visit our website at Sensor in interstitial fluid reservoir www.veedercom for more information on Veeder-Root 4 j products and services. ' P Concrete pad- P Double-wall , sump Coupling and seals as required for conduit egress (customer supplie '\Seal-off and junction box I/2"conduit to V (customer supplied) I TLS console Use tie wraps to keep cable clear of sump components and lid Tank 1 Fig.13 Typical Single-Point Min"drobtatic Sensor Installation ,.imPca..iq.cup 16