Laserfiche WebLink
2 io� 2 <br /> FLEXTM <br /> ING � c�,e�� �L��� U <br /> NFPA <br /> Facilitates FIREFLEXTm � <br /> LISTED <br /> Compliance of <br /> NFPA 30 & 30A AVAILABLE WITH THE FIREFLEX 346 SWIVEL <br /> t <br /> FireFlex flex connector: <br /> • All metal construction means one flex connector for both Above And Below Ground <br /> Applications. <br /> • UL Listed for above and below ground installation. <br /> • An 18-8 alloy with titanium, 321 Stainless Steel innercore provides longer service life. <br /> • Standard wall thickness with close pitch corrugations gives more flexibility. <br /> • The 346 Integral Male Swivel* insures ease of installation with a multi-seal design. <br /> • Actual 375 psig working pressure assembly, exceeds UL 50 psig requirement. <br /> • NFPA 30 &30A compliant for fire resistance. <br /> • Thick, schedule 80 end fittings protect against deformation of the ends. <br /> • 100%pressure tested to assure quality. <br /> • The innercore is hydraformed. <br /> • Tee's, sweep elbows, and other end fittings are available. <br /> • Minimum bend radius from the centerline is 6". <br /> • Crush and kink resistant, collapse proof and rated for full vacuum service. <br /> • Braid limited. <br /> Other lengths and configurations available call for details. <br /> *patent pending <br /> The 346 Integral Male Swivel Is Made To Make Installation Easier. The 346 IMS Is Constructed <br /> Of ASTM High Grade Carbon Steel.Sealing Protection Is Provided By 3 Viton Quad Rings <br /> At Six Sealing Points. <br /> Do not torque flex connector <br /> Install,in one plan of motion. <br /> Do not exeed minimum bend radius. <br /> a Do not compress. <br /> FLEX-ING always recommends that Flex connectors be used in a liquid <br /> tight sump and be protected with FLEX-ING's isolation/containment boot <br /> products. - <br /> Ci L <br /> �� FLEX-ING 1 -800-333-3599 • FAx 1 -800-765-4801 - FLEX-ING <br />