COMPLIANCE INFO_2005 - 2012 - Laserfiche WebLink

Home Browse Search

Secondary Containment Vacuum Sensing System Maximize protection with a vacuum monitored secondary containment system. A Secondary Containment Vacuum Features and Benefits Fadlita[esperiodic opetabiliry[esdng Sensing System for use with Veeder- Satisfy Requirements Leverage Existing Veeder-Root Systems Root's ATG Systems. The Secondary • Certified to meet California's requitement for Uses STP as the vacuum source and works with Containment Vacuum Sensing (SCVS) secondary space monitoring for tanks and litres Red jacket and FE STPS as required by AB 2481 Installs in the STP sump and connects to the System is designed to detect leaks in double- . Satisfies the requirements for Class I Leak mg walled tanks and piping systems while Detection as defined by the European console viare wining co safe t with Standard IN 13160-2 Able to shale wiring conduit with other helping to contain a release of product while Veeder-Root intrinsic ally safe(IS)probes and • 3rd Party,National Work Group and LG113 under vacuum.The system consists of: listed sensors including sump or line leak sensors • Intetfams to the Smart Sensor Interface with • Vacuum Sensors,connected to tank, Reduce Exposure to Risk Embedded Pressure Module Alarms when vacuum cannot be maintained Provides for positive shut down of pressurized sump or piping interstices lines when required • A Submersible Turbine Pump(STP), or when replenish tate exceeds 85 liters per hour Simple installation,on,no need to mess with brine The system alarms when liquid is detected in to provide a source of vacuum the secondary space • A Stuart Sensor Interface with Embedded Pressure Module in a TLS-350 Operating Temperature Rating: Console Capability Monitoring System -25 degrees C to+70 degrees C The Vacuum Sensor is compatible with the following consoles: The Vacuum Sensor is interfaced to Veeder- Cable Length: Console TLS-350R/EMC w/BIR' Root's TLS-350 Monitoring System via `" TLS-350 Plus/EMC Enhanced* intrinsically safe wiring to provide system Sensor Dimensions: TLS-350/EMC' status,replenish rate,alarm,and diagnostic 5"high x 5"wide 2"deep Upgrade Note:The Vacuum Sensor System requires the console to have version 24C software(or greater) information. along with an ECPU2 or ECPU w/NVMEM 1 board. Standard Models Vacuum Sensor Kits are available in a variety Veeder-Root P/N Description of models: 330020-467 _ 4 Vacuum Sensor Kit'for steel tank 330020-468,-469,-470,-471 4 Vacuum Sensor Kit'for fiberglass tanks(4',6',8',10') 330020-486 4 Vacuum Sensor Kit'for no tank • For monitoring double-walled piping 33002o-472 3 Vacuum Sensor Kit'for steel tank and sum interstices 330020-473,474,475,476 3 Vacuum Sensor KV for fiberglass tanks(4',6',8',10') P 330020485 3 Vacuum Sensor IW for no tank • For monitoring double-walled steel tank 3300213-479 2 Vacuum Sensor Kit'for steel tank interstices(see back page) 330020-461,-462,-483,-484 2 Vacuum Sensor Kit'for fiberglass tanks(4',6',8',10') • For double-walled fiberglass tanks 330020480 2 Vacuum Sensor tct•for no tank $ 330020.495 1 Vacuum Sensor KC for no tank 857280-100 Vacuum Sensor for piping 8 sumps These kits differ in the number of vacuum 857260-200 Vacuum Sensor for steel tanks 857280-301;302.-303,-304 Vacuum Sensor for fiberglass tnnl a rn•a•o•,n•. sensors and the configuration of associated 330020-448 Mounting Kit liquid sensors.An inline kit mounted liquid )332217-001 Relief Valve Assembly sensor is used for Vacuum Sensors 332250-001 Smart Sensor w/Embedded Pressure Sensor Module(7 Channel)" monitoring piping and sumps. An external Accessories Part Description QuantNy/Length Part Number 1/4"NPT Barbed Fittings 3 330020-487 liquid sensor(to be installed in the secondary 1/4"NPT Barbed Fittings 15 330020-488 space at the bottom of the tank)is provided 1/4"NPT Barbed Fittings 25 330020-489 with one of the Vacuum Sensors in the steel Barbed tee 1 576008-657 Vacuum Hose 25' 25' 332310-001 and fiberglass tank kits to monitor the tank. Vacuum Hose 50' 50' 332310-002 Vacuum Hose 100' 100' 332310-003 3—Way Ball Valve 1 576008-649 Schrader Valve Barbed Fitting 3 330020-496 Schrader Valve Barbed Fitting 15 330020-497 Nis Include mounting bracket,6'of vacuum hose.relief valve assembly V required)and the appropriate number of liquid sensors, 3-way ball valves, barbed fittings and hose damps so that each vacuum sensor can monitor a single tank,sump or piping interstices. ^The Vacuum Sensing System requires one 7 channel Smart Sensor Interface with Embedded Pressure Module,8 channel Smart Sensor Modules(p/n 329356-004)can be used for Vacuum Sensors eight and above. For more information call: 1-888-561-7942 e> VEEDER-ROOT '111111111.0-.