COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

CALIFORNIA REGIONAL WATER QUALITY CONTROL BOARD CENTRAL VALLEY REGION MONITORING AND REPORTING PROGRAM NO.R5-2003-0178 FOR MORADA PRODUCE COMPANY LINDEN PACKING SHED SAN JOAQUIN COUNTY This Monitoring and Reporting Program(MRP) describes requirements for monitoring industrial wastewater,ponds, land application areas, and groundwater. This MRP is issued pursuant to Water Code Section 13267. The Discharger shall not implement any changes to this MRP unless and until a revised MRP is issued by the Executive Officer. Regional Board staff shall approve specific sample station locations prior to implementation of sampling activities. All samples should be representative of the volume and nature of the discharge or matrix of material sampled. The time, date, and location of each sample shall be recorded on the sample chain of custody form. Field test instruments (such as those used to test pH and dissolved oxygen) may be used provided that: 1. The operator is trained in proper use and maintenance of the instruments; 2. The instruments are field calibrated prior to each monitoring event; 3. Instruments are serviced and/or calibrated by the manufacturer, or manufacturer approved repair shop, at the recommended frequency; and 4. Field calibration reports are submitted as described in the "Reporting"section of this MRP. INFLUENT MONITORING Wastewater influent samples shall be collected prior to discharge into the wastewater storage pond. If wastewater was not generated during the month, then the monitoring report shall so state. Effluent monitoring shall include, at a minimum, the following: Sampling Reporting Constituents Units Type of Sample Frequency Frequency Flow' gpd ContinuousZ Daily Monthly BODS mg/L Grab Weekly Monthly PH S.U. Grab Weekly Monthly Flow rate shall be monitored by a meter. Z Continuous monitoring requires the flow meter data to be recorded daily.