INSTALL_2004 - Laserfiche WebLink

Home Browse Search

Wednesday, June 02, 2004 11:40 AM Art Gomez 510-494-1596 p.12 Optional 'lank Accessories Attached Collar (AC) Fiberglass Holddown Strap This fiberglass attached collar, without flange, can be used Straps are used whena tank requires anchoring.The straps to surround the fitting(s) or manway.The collar can be used provide the link between the tank and the owner-supplied with attached collar risers. I.D.s can be 42" or 48". anchoring hardware. For more information on straps and Strap locations may their use, refer to the current Xerxes Installation Manual and be affected. Operating Guidelines. ®�J ® 3 I/4' ® 1 _ 1 13/8" Attached Collar Riser (ACR) Deadmen This fiberglass attached Deadmen supplied by Xerxes are designed to collar riser is intended for use � American Concrete Institute(ACI)standards, with a 42"-or 48"-diameter which include the use of reinforcement bars. attached collar. (This is sold l Galvanized tie down anchoroints are separately.) Riser body \ adjustable, making it easier for the / is 42" or 48" I.D., with a flat top installer to properly position them and a 22"-or 32"-diameter at the holddowr-strap friction-fit cover within top.This locations on the tank. riser provides an enclosure for a submersible pump and also provides a termination point for double-wall piping systems. The bonding of the riser to the collar is to be done by the contractor. (Adhesive kits are included.) — Watertight Attached Collar Riser (ACRWT) This fiberglass watertight attached collar riser is intended '_' Turnbuckle for use with a 42"-or 48"-diameters attached collar. (This is sold -- Xerxes-supplied turnbuckles are drop-forged and are sized separately.) The riser t _: \ to the tank ordered: 10'-diameter tanks require 3/4"x 18",- body is 42" or 48" I.D. with a 8'-diameter tanks require 3/4"x 12- 6'-diameter tanks 26"-diameter opening.This riser require 3/4"x 9" turnbuckles.Xerxes turnbuckles will provides an enclosure for a connect the tank straps directly to the concrete anchors. submersible pump and also No wire rope or clamps are necessary if the required provides a termination point number of turnbuckles is used. for double-wall piping systems. The bonding of the riser to the collar and the top to the riser is done by the contractor. (Adhesive kits are included.)