Laserfiche WebLink
SWRCB, January 2002 Page 2 of 2 <br /> 7. UNDER-DISPENSER CONTAINMENT (UDC) TESTING <br /> Test Method Developed By: r UDC Manufacturer r Industry Standard G Professional Engineer <br /> r Other(Specify) <br /> Test Method Used By: r Pressure r vacuum f: Hydrostatic <br /> r Other(Specify) <br /> Test Equipment Used: P—L—I Equipment Resolution: 00001 in. <br /> UDC#9/10 UDC#11/12 UDC # UDC# <br /> uoc Manufacturer: unknown unknown <br /> uDC Material: Fiberglass Fiberglass <br /> UDC Depth: 30.00 30.00 <br /> Height from UDC Bottom to Top of 15.00 15.00 <br /> Highest Piping Penetration: <br /> Height from UDC Bottom to Lowest 3.00 32.00 <br /> Electrical Penetration: <br /> Condition of UDC prior to testing: good good <br /> Portion of UDC Tested t 17 17 <br /> Does turbine shut down when UDC <br /> sensor detects liquid(both product and r Yes r No fi NA r Yes r No NA r Yes r No r NA r Yes r No r NA <br /> water)?- <br /> Turbine shutdown response time sec sec sec sec <br /> Is system programmed for fall-safe r Yes r Nor. NA r Yes r No fi NA r Yes r No r NA r Yes r No r NA <br /> shutdown?• <br /> Was fail-safe verified to be operational?- r Yes r Nor* NA r Yes r No(* NA r Yes r No r NA r Yes r No r NA <br /> Walt time between applying 5 min 5 min min min <br /> pressure/vacuum/water and starting test <br /> Test start Time: 14:18:00 14:23:00 <br /> Initial Reading(RI): 0.00000 in. H2O 0.00000 in. H2O <br /> Test End Time: 14:33:00 14:38:00 <br /> Final Reading(Rr): 0.00060 in. H2O -0.00020 in. H2O <br /> Test Duration: 15 min 15 min <br /> Change In Reading(Rt-RI)- 0.00060 in. H2O -0.00020 in. H2O <br /> Pass/Fail Threshold or Criteria: +/-0.00200 +/-0.00200 +/- +/- <br /> Test Result: Pass Pass <br /> Was sensor removed for testing? (so Yes r Nor NA 11 Yes r Nor NA r Yes r No r NA r Yes r Nor NA <br /> was sensor properly replaced and ti Yes r Nor NA f. Yes r Nor NA r Yes r No r NA r Yes r No r NA <br /> verified functional after testing? <br /> Comments ?(include information on repairs made prior to testing,and recommended follow-up for failed tests) <br /> 1 If the entire depth of the UDC Is not tested,specify how much was tested.If the answer to any of the questions Indicated with an asterisk(-)is?NO?or?NA?,the <br /> entire UDC must be tested. <br />