COMPLIANCE INFO_2013 - 2018 - Laserfiche WebLink

Home Browse Search

M1rlfrun-RYAN INc. Job# 20-630774.1 SWRC&,January 2002 Page 2 of 3 6. PIPING SUMP TESTING Test Method Developed By: Tank Manufacturer industry Standard Professional Engineer Other(specify) Test Method Used: Pressure Vacuum Hydrostatic Other(specify) Test Equipment Used: Incon Equipment Resolution: 0.0001 SUMP# Fent SUMP4 SUMP# Sum # Sump Diameter: 24" Sump Depth: 31" Sump Material: Fiberglass Height from Tank Top to Top of 10" Highest Piping Penetration: Height from Tank Top to Lowest 14" Electrical Penetration: Condition of sump prior to testing: Good Portion of Sump Tested(l) Above Penetration Does turbine shut down when sump sensor detects liquid(both Yes :'No; NA Yes No NA Yes No NA Yes No NA product and water)?* Turbine shutdown response time N/A Is system programmed for fail-safe Yes No: NA Yes No NA Yes No NA Yes No NA shutdown?* is; Was fail-safe verified to be Yes No; NA Yes No NA Yes No NA Yes No NA Wait time between applying pressure/vacuum/water and starting lOntin test: Test Start Time: 11:20 Initial Reading(Ri): 4.8340 Test End Time: 11:35 Final Reading(Ro 4.8345 Test duration: 15min Change in Reading(Rf-Ri): 0.0005 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 Test Results: X Pass Fail Pass Fail Pass Fail Pass Fail Was sensor removed for testing? f c 3 No NA Yes No NA Yes No NA Yes No NA Was sensor properly replaced and verified functional after testing? €sry No NA Yes No NA Yes No NA Yes No NA Comments-(include information on repairs made prior to testing,and recommend follow-up for failed tests) (1)If the entire depth of the sump is not tested,specify how much was tested.If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested.(See SWRCB LG-160)