Laserfiche WebLink
5.5 EXPOSURE MONITORING <br /> Exposure monitoring will be required for this project. If required, the type, frequency, <br /> and details related to this monitoring are provided in Table 3. Instrumentation required <br /> ' for this monitoring is as follows*: <br /> Explosimeter <br /> Oxygen Meter <br /> Hydrogen Sulfide Meter <br /> Dust Meter <br /> Photoionization Detector (PID) <br /> Flame Ionization Detector (FID) <br /> Detector Tube <br /> (Specify Type) <br /> Only personnel who are familiar with the proper use and limitations will perform <br /> exposure monitoring. Instruments will be calibrated prior to use in accordance with <br /> manufacturer's recommendations. A log of this calibration shall be maintained on the <br /> Equipment Calibration Log Form' provided in the "FORMS" section of this HASP. Air <br /> monitoring results will either be logged in the field logbook or using the"Air Monitoring <br /> Data Form' provided in the"FORMS" section. <br /> ' * Exposure monitoring will not be required for this type of work activity, since no soil <br /> samples will be collected. Personnel will not be exposed to any subsurface conditions. <br /> ' 5.6 CHEMICAL AND PHYSICAL PROPERTIES OF HAZARDOUS SUBSTANCES <br /> The exposure limits, recognition qualities, acute and chronic effects, and first aid <br /> treatments for hazardous chemicals expected to be found at the site are presented in <br /> Table 1 (Exposure Limits and Recognition Qualities) and Table 2 (Health Hazards and <br /> First Aid). <br /> 5.7 INITIAL LEVEL OF PROTECTION <br /> This project will be conducted using the following initial level of protection: <br /> Level A Level B Level C Level D X <br /> 1 <br />