Laserfiche WebLink
A//1r/ /c (1/1 ['Ill 11 0111HIIIllcll /\,(,Ill of k <br /> PAGE 10 <br /> AEN (CALIFORNIA) <br /> QUALITY CONTROL REPORT <br /> AEN JOB NUMBER 9509466 <br /> CLIENT PROJECT ID USA #65 <br /> Quality Control and Project Summary <br /> All laboratory quality control parameters were found to be within established <br /> limits <br /> Definitions <br /> Laboratory Control Sample (LCS)/Method Spike(s) Control samples of known composition LCS and Method Spike <br /> data are used to validate batch analytical results. <br /> Matrix Spike(s) Aliquot of a sample (aqueous or solid) with added quantities of specific compounds and <br /> subjected to the entire analytical procedure. Matrix spike and matrix spike duplicate QC data are advisory <br /> Method Blank An analytical control consisting of all reagents, internal standards, and surrogate standards <br /> carried through the entire analytical process. Used to monitor laboratory background and reagent contamination <br /> Not Detected (ND) Not detected at or above the reporting limit <br /> Relative Percent Difference (RPD) An indication of method precision based on duplicate analysis <br /> Reporting Limit (RL) The lowest concentration routinely determined during laboratory operations. The RL is <br /> generally i to 10 times the Method Detection limit (MDL). Reporting limits are matrix, method, and analyte <br /> dependent and take into account any dilutions performed as part of the analysis <br /> Surrogates: Organic compounds which are similar to analytes of interest in chemical behavior, but are not found <br /> in environmental samples Surrogates are added to all blanks, calibration and check standards, samples, and <br /> spiked samples Surrogate recovery is monitored as an indication of acceptable sample preparation and <br /> instrumental performance <br /> D Surrogates diluted out <br /> # Indicates result outside of established Laboratory QC limits <br /> I <br />