Laserfiche WebLink
y <br /> The necessity for Level A or Level B protection is not expected to be encountered on this or <br /> other PACIFIC sites. If site conditions indicate that Level C protection is inadequate, all site <br /> activities are to be ceased pending further review by the Company Safety Officer and <br /> PACIFIC Senior Management. <br /> 7.0 WORK ZONES AND SECURITY MEASURES <br /> A. General <br /> A site must be controlled to reduce the possibility of exposure to any contaminants present <br /> and their transport by personnel or equipment from the site. <br /> The possibility of exposure or translocation of contaminants can be reduced or eliminated in <br /> a number of ways, including: <br /> o Setting up security or physical barriers to exclude unnecessary personnel <br /> from the general area <br /> o Minimizing the number of personnel and equipment on-site consistent with <br /> effective operations <br /> o Establishing work zones within the site <br /> o Conducting operations in a manner to reduce the exposure of personnel and <br /> equipment <br /> o Minimizing the airborne dispersion of contaminants <br /> o Implementing the appropriate personnel and equipment decontamination <br /> procedures <br /> B. Field Operations Work Area <br /> Work areas (zones) will be established based on anticipated contamination. Within these <br /> zones prescribed operations will occur utilizing appropriate personal protective equipment. <br /> The planned zones are: <br /> 1. Exclusion Area(contaminated). The actual areas where work is being performed <br /> are considered to be the exclusion areas. Access to these areas will be <br /> 8 <br />