Laserfiche WebLink
Sparger 4 - Analytical Laboratory Dmsion <br /> ory Diviision <br /> Tech ®!0-','9 ' Inc, Scientific <br /> LaScie�ntific Dlnnsion <br /> i <br /> II Qualily Control <br /> A Pro act Specific QQ No project specific QC (i e , spikes and/or <br /> duplicates) was requested <br /> iB Method Blank Results A method blank is a laboratory-generated <br /> sample which assesses the degree to which laboratory operations and <br /> procedures cause false-positive analytical results for your sample <br /> No target parameters were detected in the method blank associated with <br /> your sample at the reporting limit levels noted on the data sheets in the <br /> Analytical Results section <br /> C Laboratory Control Spike A Laboratory Control Spike (LCS) is a <br /> sample which is spiked with known analyte concentrations, and analyzed <br /> at approximately 10% of the sample load in order to establish method- <br /> specific control limits The LCS results associated with your samples are <br /> on the attached Laboratory Control Spike and Laboratory Control Spike <br /> Duplicate Analysis Report <br /> D Matrix Spike Results A Matrix Spike is a sample which is spiked with <br /> known analyte concentrations, and analyzed at approximately 10% of the <br /> ' sample load in order to establish method-specific control limits The <br /> Matrix Spike results associated with your samples are on the attached <br /> Matrix Spike and Matrix Spike Duplicate Analysis Report <br /> Accuracy is measured by Percent Recovery as in <br /> ' % recovery = (measured concentration) x 100 <br /> (actual concentration) <br /> i <br /> III Analysis Results <br /> ' Results are on the attached data sheets <br />