ARCHIVED REPORTS_XR0005138 - Laserfiche WebLink

Home Browse Search

i 2 Do not use faulty or suspect equipment 3 Use only new and intact protective clothing Change the suit. gloves. etc it they tear I 4 Do not use hands to wipe sweat away from face. Use a clean towel or paper towels 5 Practice contamination avoidance at all times 6 Do not smoke, eat drink or apply cosmetics while working 7 Wash hands. face. and arms prior to taking rest breaks, lunch break, and leaving the site at the end of the work day 8 Check in and out with the SSO upon arrival and departure 9 Perform decontamination procedures completely as required by this SSHP 10 Notify the SSO immediately it there is an accident that causes an injury or illness DECONTAMINATION iDecontamination will take place in the decontamination area identified by the SSO in the field. All workers, PPE, sampling equipment, and heavy equipment leaving the exclusion area will be decontaminated to prevent the spread of hazardous materials. All workers will wash hands, arms and face after removing PPE and prior to leaving the site Disposable items will be bagged for disposal along with other hazardous wastes removed from property Sampling equipment will be decontaminated using a three-step decontamination wash. (1) wash with alconox and water, (2) rinse with tap water. and(3) rinse with deionized water. Support vehicles are to be left outside the exclusion area so that decontamination will not be necessary All heavy equipment will be steam cleaned prior to removal from the site There are no special emergency decontamination procedures anticipated for this project. EMERGENCY PROCEDURES In the event of an emergency on site, the SSO will direct the course of action It may be necessary for the SSO to depend on the other on-site personnel for assistance. The SSO will call for emergency assistance if needed As soon as practical, the SSO will contact the PM and the HSO. All staff assigned to this protect will be briefed on the procedures and responsibilities for implementation. A map showing the location and route to the hospital is included as Figure 1 The SSO is trained in first aid and CPR A first aid kit and fire extinguisher will be located . in the BC field vehicle The emergency shut-off switch for the drill ng will be identified, and all field personnel working in the area will be informed of its location and function during the site safety briefing The nearest telephone is located at the office building on site. The emergency telephone numbers to be used to call for assistance are listed in the section on Key Personnel and Responsibilities with the reference list of project contacts 7603RFPM73WENT-M""'