ARCHIVED REPORTS_XR0012539 - Laserfiche WebLink

Home Browse Search

M Gilmartin Project No 1232 October 7, 1998 Page 3 of 5 Task 5—Equipment Installation and Start-up The following steps will be performed under this task • Procurement of a 350-cfm or equal Skid Mounted Thermal Oxidizer and 30-scfm @ 30 psfg air compressor according to specifications to be developed It is essential for the compressor to have the specified discharge pressure because a sparging portion of the well will be located more than 30 feet below the ground water level to affect the area containing the trapped free- product The cornpressoi will be provided with a timer which will allow an spargzng to be performed in a 'pulse" mode Based on discussions with potential vendors, the cost foi the oxidizes and compressor including taxes and shipping cost should be in the range of $75,000 If awarded the contract, EAI will evaluate used equipment and/or lease options • Installation of the equipment in compliance with appropriates rules and permit requirements • Installation of a fence around treatment compound • Connecting the oxidizer and compressor to correspondent process lines • Interaction with a local natuial gas supply company and installation and pressure testing of a supply line from a gas meter to the oxidizer • Installation of 3-phase electrical lines to the oxidizer and compressor • Placing ORC in wells MW-3 and MW-4 • Start-up the thermal oxidizer according to vendor instructions and permit requirements As described in the CAP, the corresponding field measurements will be taken and soil gas samples will be obtained and tested • Start-up the air compressor according to vendor instructions and permit requirements As described in the CAP, the corresponding field measurements will be taken. * Adjust the process parameters to achieve the maximum effect Task 6 —Operation and Maintenance The following steps will be performed under this task • Visiting the site on the bi-weekly basis to perform system monitoring • Adjusting operational parameters based on the field and analytical results • Providing necessary maintenance according to vendor's operation manuals I'crfor�.ng analytical control spec.Ifcd in permit conditions • Replacing ORC bags on the 6-month basis Task 7 - Reporting Complete the 60 day start-up report required by the SJVAPCD and quarterly monitoring reports foi treatment system operation required by SJPHS-EHD Draft copies of all reports will be submitted for client re`sew and comment, prior to submittal to the regulatory agencies ENVIRONMENTAL AUDIT,INC