Laserfiche WebLink
3 <br /> ends are covered with Teflon and sealed with tight-fitting caps Each retained <br /> sample is identified as to location, depth and time collected <br /> The selection of soil samples for laboratory analysis is based upon 1) the project <br /> ' objectives (define contamination zone) , 2) qualitative field screening performed in <br /> the field using the organic vapor detector and 3) field observations such as <br /> lithology, odor, discoloration, or high moisture content <br /> DPT boring holes will be kept open for 24 to 48 hours with 3/4-1 inch pvc pipe to <br /> allow stabilization of ground water levels in the holes Depth to water will be <br /> measured for all holes within several hours, holes will then be closed by grouting <br /> the boring with cement/bentonite slurry <br /> ' The soil samples will be submitted under chain of custody procedures to and <br /> anayzed by a Califomia DOH certified laboratory The laboratory of choice is <br /> Sequoia Analytical in Sacramento Samples will be submitted on a "normal' 10-15 <br /> working day turnaround basis, utilized the attached chain of custody form <br /> The soil samples will be analyzed using the following methods <br /> TPH-Extractable as Diesel (by EPA Method 8015M) <br /> TPH-Extractable as Kerosene (by EPA Method 8015M) <br /> TPH-Purgeable as Gasolene (by EPA Method 8015M) <br /> Benzene, Toulene, Ethylbenzene and Total Xylenes (BTEX) (by EPA Method 8020) <br /> I <br /> 1 <br /> l� <br /> t B - 3 <br /> r <br />