ARCHIVED REPORTS_XR0009232 - Laserfiche WebLink

Home Browse Search

® KEY TO ABBREVIATIONS and METHOD REPTJUENCES Less than, When appearing in results column indicates analyte not detected at the value following This datum supercedes the listed Reporting Limit * Reporting Limits are a function of the ailution factor for any given sample Actual reporting limits and results have been multiplied by the listed dilution factor Do not multiply the reporting limits or reported values by the ailution factor dw Result expressed as dry aeignt mean Average, sum of measurements aivided by number of measurements mg/Kg (ppm) Concentration in units of milligrams of analyte per kilogram of sample, wet-weight basis (parts per million) mg/L Concentration in units of milligrams of analyte per liter of sample mL/L/hr Milliliters per liter =er hour MPN/100 mL 'dost probable number of bacteria per one hundred milliliters of sample N/A Not applicable NA Not analyzed • ND Not aetected, the analyte concentration is less than the applicable iistea reporting limit NTU Nephelometric tarnidity units RPD Relative percent difference, 100 [value = - Value 21 /mean value SNA Standard not available ug/Kg (ppb) Concentration in units of micrograms of analyte per kilogram of sample, .vet-weight basis (parts per nillion) ug/L Concentration in units of micrograms of analyte per liter of sample umbos/cm Micromhos per centimeter Method References Methods 100 through 493 see "Methods for Chemical Analysis of Water & Wastes", U S EPA, 600/4-79-020, Rev 1983 Methods 601 through 625 see "Guidelines Establishing Test Procedures for the Analysis of Pollutantsil U S EPA, 40 CFR, Part 136, Rev 1988 Methods 1000 through 9999 see "Test Methods for Evaluating Solid Waste" , U S EPA SW-846, 3rd eaition, 1986 , Rev 1, December 1987 SM see "Standard Methods for the Examination of Water & Wastewater, 17th Edition, APHA, 1989 Revised September, 1993 abb 93