Laserfiche WebLink
^ Workmanship The pipe and fittings shall be free from all defects including delami <br />indentations, pinholes, foreign inclusions, bubbles and resin -starved areas <br />and serviceability C*pipe or fittings. The pipe and fittings shall be as <br />uniform aocommercially practicable incolor, opacity, density and other <br />physical properties. <br />Testing Proof testing <br />All fittings shall be hydrostatically tested bythe manufacturer torated pressure , <br />prior' - shipment for signs _ leakage — porosity. <br />Quality control testing <br />' <br />A sample of pipe shall be tested at a frequency of at least once every <br />1200 feet (360 m) to determine conformance of the materials to the short-term <br />circumferential stress requirement tabulated above. <br />Marking Each component shall bemarked to show the following: <br />Underwriters' Laboratories listing mark <br />Manufacturer's name <br />Maximum pressure rating <br />Important notice This literature and the information and recommendations bcontains are <br />based on data reasonably believed tobereliable. However, such factors as <br />variations inenvironment, application orinstallation, changes in operating <br />procedures, of data may cause different <br />makes nmrepresentation orwarranty, express orimplied, including warranties <br />ofmerchantability orfitness for purpose, aatothe accuracy, adequacy r <br />completeness of the recommendations or information contained herein. <br />Ameron assumes no liability whatsoever in connection with this literature <br />orthe information orrecommendations itcontains. <br />Written oommenteth�docunmentare invbmd.P�aoewrda <br />Engineering Manager, - Ameron Fiberglass Pipe Division. <br />