Laserfiche WebLink
L � <br /> Material Safety Data Sheets for information on compounds to be encountered. All on-site <br /> employees will take reasonable precautions to avoid unforeseen hazards. After documenting <br /> full understanding of the SSP, each on-site employee will be responsible for strict adherence <br /> to all points contained herein. Any deviation observed will be reported to the SSO and <br /> corrected. On-site employees are held responsible to perform only those tasks for which they <br /> are qualified. <br /> JOB HAZARD ANALYSIS <br /> Hazards likely to be encountered on-site include those commonly encountered when operating <br /> any mechanical equipment, such as the danger of falling objects or moving machinery. <br /> Simple precautions will reduce or eliminate risks associated with operating such equipment. <br /> An excavating contractor has been employed to deliver and operate all removal equipment. <br /> Only qualified personnel will have any contact with this equipment. All on-site personnel, <br /> including the excavating contractor and his employees, are required to wear hard hats when <br /> in close proximity to excavating equipment. Latex sampling gloves will be worn by persons <br /> collecting or handling samples to prevent exposure to contaminants. Proper respiratory <br /> equipment will be worn if vapor contamination levels on-site exceed action levels as <br /> determined by using a Photo-Ionization Detector (PID) or an Organic Vapor Analyzer <br /> (OVA). Furthermore, no on-site smoking, open flame, or sparks will be permitted to <br /> prevent accidental ignition. <br /> EXPOSURE MONITORING PLAN <br /> A Photo-Ionization Detector (PID) or Organic Vapor Analyzer will be used to monitor vapor <br /> concentrations around the site. Should concentrations exceed TLVs protective measures will <br /> be taken. <br /> PERSONAL PROTECTNE EQUIPMENT <br /> All personnel on-site will have access to respirators with organic vapor cartridges. <br /> Replacement cartridges will be available on-site as needed. When handling samples, the on- <br /> site geologist will wear latex gloves. Hard hats will be worn by all personnel on-site when <br /> in the proximity of heavy equipment. <br /> WORK ZONES AND SECURITY MEASURES <br /> Access to the working zone will be restricted to authorized personnel. A set of cones, <br /> placards or wide yellow tape, surrounding the site will define the perimeter. The Project <br /> Manager will be responsible for site security. <br /> DECONTAMINATION MEASURES <br /> Avoidance of contamination whenever possible is the best method for protection. On-site <br /> personnel will avoid sitting, leaning, or placing equipment on VOC-affected soil. All <br />