Laserfiche WebLink
Date submitted <br /> Specific analytical parameters <br /> Well number <br /> Sample source <br /> Analytical Methods <br /> Samples collected as part of the monitoring program were analyzed consistent with <br /> accepted analytical procedures The following publications were the pnmary references <br /> for analytical procedures <br /> Methods for Chemical Analysis of Water and Wastes, EPA-600/4-79-020, revised <br /> March 1983 <br /> Methods for Organic Chemical Analysis of Municipal and Industrial Wastewater, <br /> EPA-600/4-82-057, July 1982 <br /> Test Methods for Evaluating Solid Wastes Physical/Chemical Methods, EPA <br /> SW-846, 3rd edition, November 1986 <br /> Leaking Underground Fuel Tank Manual, State Water Resources Control Board, <br /> State of California Leaking Underground Fuel Tank Task Force, revised October <br /> 1989 <br /> The laboratories selected to perform the analytical work are certified by the Department <br /> of Health Services (DHS) for hazardous waste testing <br /> Quality Assurance/Quality Control <br /> Quality assurance/quality control (QA/QC) measures were taken to confirm the integrity <br /> of the field and laboratory data generated during the monitoring program The procedures <br /> used to assess data quality are described in this section An evaluation of the field and <br /> laboratory quality assurance data will be included in the technical reports <br /> Field Quality Assurance Procedures <br /> Field quality assurance procedures were included in each monitoring event and included <br /> documenting field instrument calibration, and collecting and analyzing trip blanks, field <br /> blanks, and duplicate samples Split samples may also have been included in the <br /> monitoring program <br /> i <br /> SAC1pjn520\25201000 idl-94 lfc 1 A-7 Rev 0, 10/11/94 <br />