Laserfiche WebLink
r. <br /> 7.0 WORK ZONES AND SECURITY MEASURES <br /> A. . General <br /> A site must be controlled to reduce the possibility of exposure to any contaminants <br /> present and their transport by personnel or equipment from the site. <br /> The possibility ' of exposure or translocation of contaminants can be reduced or <br /> eliminated in a number of ways, including: <br /> o Setting up 'security or physical barriers to exclude unnecessary <br /> personnel from the general area <br /> o Minimizing the number of personnel and equipment on-site consistent <br /> with effective operations <br /> o Establishing work zones within the site <br /> o Conducting. operations in a manner to reduce the exposure of <br /> personnel and equipment <br /> o Minimizing the airborne dispersion of contaminants <br /> o Implementing the appropriate personnel and equipment <br /> decontamination procedures <br /> B. Field Operations Work Area <br /> Work areas (zones) will be established based on anticipated contamination. Within <br /> these zones prescribed operations will occur utilizing appropriate personal protective <br /> equipment. The planned zones are: <br /> ]..Exclusion Area (contaminated). The actual areas where work is being <br /> performed are considered to be the exclusion areas. Access to these <br /> areas will be strictly limited to the personnel needed to conduct the <br /> work being performed. <br /> 2.Contamination Reduction Area. An area near to each active work zone will <br /> be designated as the contamination reduction area. Disposable <br /> protective gear will be removed and placed in garbage bags prior to <br /> 3104001/SSPDRILL 9 October 7, 1993 <br />