Laserfiche WebLink
s <br /> GETTLER-RYAN INC. <br /> FIELD METHODS AND PROCEDURES <br /> Site Safetv Plan <br /> Field work performed by Gettler-Ryan Inc (GR) is conducted in accordance with GR's Health <br /> and Safety Plan and the Site Safety Plan GR personnel and subcontractors who perform work <br /> at the site are briefed on the contents of these plans prior to initiating site work The GR <br /> geologist or engineer at the site when the work is performed acts as the Site Safety Officer GR <br /> utilizes a photoionization detector(PID) to monitor ambient conditions as part of the Health <br /> and Safety Plan i <br /> Collection of Soil Samples <br /> Soil bonngs are drilled by a California-licensed well driller A GR geologist is present to <br /> observe the drilling, collect soil samples for description, physical testing, and chemical <br /> analysis, and prepare a log of the exploratory soil boring Soil samples are collected from the <br /> soil boring with a split-barrel sampling device fitted with 2-inch-diameter, clean brass tube or <br /> stainless steel liners The sampling device is driven approximately 18 inches with a 140-pound <br /> hammer falling 30 inches The number of blows required to advance the sampler each <br /> successive 6 inches is recorded on the bonng log The encountered soils are described using <br /> the Unified Soil Classification System(ASTM 2488-84) and the Munsell Soil Color Chart <br /> After removal from the sampling device, soil samples for chemical analysis are covered on both <br /> ends with teflon sheeting or aluminum foil,capped, labeled, and place in a cooler with blue ice <br /> for preservation A chain-of-custody form is initiated in the field and accompanies the selected <br /> soil samples to the analytical laboratory Samples are selected for chemical analysis based in <br /> part on <br /> a depth relative to underground storage tanks and existing ground surface <br /> b depth relative to known or suspected groundwater <br /> c depth relative to areas of known hydrocarbon impact at the site <br /> d presence or absence of contaminant migration pathways <br /> e presence or absence of discoloration or staining <br /> f presence or absence of obvious gasoline hydrocarbon odors <br /> g presence or absence of organic vapors detected by headspace analysis <br /> A-I <br />