Laserfiche WebLink
Veeder-Root Sensor Application Guide <br /> Position-Sensitive Sensor <br /> The Position-Sensitive Sensor is installed in a pan/sump and incorporates a float switch to detect water and/or <br /> hydrocarbons. The sensor also alarms if it is moved off the bottom of the pan/sump. <br /> Sensor Detection Capabilities - Alarm Conditions <br /> • Fuel alarm is triggered when liquid reaches a nominal height of 1-1/2 inches. <br /> • Sensor Out alarm is triggered when sensor is moved off bottom of the pan/sump. <br /> Operating Capabilities <br /> • Operating temperature range: 0 to +60°C. <br /> • Storage temperature range: -40 to +70°C. <br /> • Sensor dimensions: 12" high, 2.2"diameter. <br /> Sensor/Cable Length Configurations <br /> • Position-Sensitive Sensor w/ 12 foot cable- Form Number 794380-323 <br /> Sensor Interface Module <br /> • TLS-350 series consoles (except TLS-350J)- Interstitial/Liquid Sensor interface module (P/N 329358-001) <br /> accepts up to 8 sensors (a maximum of 64 sensors could be monitored by the console). <br /> • TLS-350J console - 3 sensors max. <br /> • TLS-300/PC-300 series consoles (no interface module required) - 8 sensors max. <br /> • ILS-350 console-A Two-Wire Module(P/N 329675-001) accepts up to 4 sensors (a maximum of 16 sensors <br /> could be monitored by the console). <br /> • TLS-450- USM (P/N 332812-001) accepts up to 16 sensors <br /> Console Software Compatibility <br /> • TLS-350 series/TLS-300 consoles (Version 1 or later) <br /> • ILS-350 (All) <br /> • TLS-450 (All) <br /> Compatible Fuels <br /> • Unleaded gasoline <br /> • Unleaded with up to 5%methanol, <br /> 85%ethanol,or 15%MTBE <br /> • Leaded gasoline - <br /> • Diesel Submersible Sensor <br /> Kerosene pump Cord grip Weatherproof <br /> • \ junction box <br /> • Jet fuel <br /> • Aviation gasoline Containment \ Seal-off <br /> sump <br /> Related Sales Literature 112"Rigid <br /> conduit <br /> Visit our website at www.veeder.com to console <br /> for more information on Veeder-Root <br /> products and services. . -Brackets,clamp,etc. <br /> from optional Universal <br /> sensor mounting kit <br /> - Product line <br /> IMPORTANT!Housing must compress --J <br /> position indicator against bottom of the <br /> sump or you will have a'Sensor Out'alarm. Incorrect Correc? <br /> Position-SensitiveFig.4 Typical <br /> 7 <br />