Laserfiche WebLink
#o LEAK DETECTION <br /> TECHNOLOG IESLLc <br /> 1400 East Paseo Pavon • Tucson,AZ 85718 • Phone 520.207.4878 • FAX: 520.509.3720 <br /> • «v.LeakDetect.net <br /> Final ELD Testing Instructions for Owners and Contractors <br /> The state of California requires ELD testing at any facility whenever an <br /> Underground Storage Tank is installed at a new or existing installation. The <br /> NWleaksm Testing Method developed by Leak Detection Technologies is the most <br /> versatile and flexible testing method in today's market. Owners and contactors <br /> require quick and accurate results that can only be found by using the Nmleaksm <br /> testing method. <br /> California requires the industries best available technology to test their <br /> Underground Storage Tanks(UST). These regulations help make California one of <br /> the nation's cleanest states from uncontrolled UST releases. <br /> Standard technologies such as pressure testing cannot detect or locate small leaks to <br /> California's standards. Because small leaks can go undetected Nwleaksm pretesting <br /> should be completed before the final backfilling process is started. <br /> We have completed a check list of expectation to guide the contractor and help <br /> make the site personnel as successful as possible. <br /> Scheduling: <br /> 1. LDT offer services throughout California. Therefore it is important that you <br /> schedule with us around the time the tank pit excavation begins. <br /> 2. Early scheduling makes for an on time arrival of our crews. <br /> 3. Once we have the site scheduled we will contact the contractor by phone two <br /> weeks before the scheduled arrival date to confirm the starting date and again <br /> at one week out. Phone 520-2107-4878,Fax 5210-509-3720, or <br /> info@LeakDetect.net <br /> Timing: <br /> 1. The State requires the fueling system to be completed before ELD testing <br /> can begin. <br /> 2. All finished ground surfaces shall be complete over the underground <br /> petroleum components to be tested <br /> 3. All electrical and communication cabling including, conduit, conduit <br /> connections and covers shall be complete <br /> 4. Spill buckets, fill and vapor adapters,ATG, drop tubes, caps, <br /> 5. Vent risers caped <br /> 6. Ballasted Tanks; LDT can test tanks that are water of product ballasted. <br /> LDT must be notified in advance if the tank/s will be ballasted during the test <br /> Author David Rabb <br /> 1 of 2 <br />