FIELD DOCUMENTS - Laserfiche WebLink

Home Browse Search

601193NS V December 28,2000 Page 2 of 3 IMMEDIATELY FOLLOWING COMPLETION OF WORK PERMITTED HEREIN, PERMITTEE SHALL FILL OUT AND MAIL NOTICE OF COMPLETION PROVIDED BY GRANTOR. Permittee's attention is directed to Section 6, "CONTROL OF MATERIALS", of the State Standard Specifications Reference to Engineer in the State Standard Specifications shall include State Representative. Permittee is directed to Standard Specification section 7-1.11 Preservation of Property, and Business and Professions Code, Section 8771. Permittee shall physically inspect the work site and locate survey monuments prior to work commencement. Monuments shall be referenced or reset in accordance with Business and Professions Code. A pre-job conference with the permittee, contractor, and State representative is required prior to start of work. Permittee shall contact the State representative and arrange the meeting. This meeting may be waived at the direction of the State representative. Permittee shall, prior to commencement of any work, provide the State representative with the name and phone number of the person in responsible charge of the work to be performed under this permit. Traffic control shall be done in conformance with Caltrans Manual of Traffic Controls 1996. In addition to General Provision 35, "Notification of department and TMC",the permittee shall notify the Department's representative AND THE TRANSPORTATION MANAGEMENT CENTER(TMC) immediately prior to initiating any traffic control and immediately upon the removal of any traffic controls. The telephone number for Caltrans District 10 TMC is (209) 948-7556. Except when necessary, as determined by the State representative, no installation, construction equipment, or personal vehicles shall operate or park within the traveled way. No cutting of pavement or improved shoulder is authorized under this permit. In addition to the attached General Provisions, the following special provisions are also applicable: 1. Unless specifically authorized elsewhere in this permit, survey work shall not be performed: A. On holiday(s) and a day preceeding holiday(s) B. In medians. C. When work requires traffic control on lanes. 2. Permittee shall furnish, place, and maintain required signs, safety equipment, and traffic control and warning devices in accordance with the Manual of Traffic Controls published by the Department of Transportation. 3. All personnel shall wear hard hats and orange vests, shirts or jackets as appropriate. 4. Unless specifically authorized in this permit, survey markings within the right of way shall be temporary. Paint used for markings shall be water-soluble and other markers shall be removed upon completion of survey. 5. Any collected survey data requested by Caltrans shall be furnished to Caltrans without charge. 6. Measurements across traffic lanes shall be made through the use of an electronic distance-measuring device utilizing non-visible light or other optical means. 7. Electromagnetic and radioactive equipment must be operated by certified personnel and shall not interfere with radio communications or be directed toward the traveling public. 8. Vehicles necessary for survey work may be parked in Sate Highway right of way off paved shoulders. Auxiliary support and employee vehicles shall remain outside the right of way. 9. Detonating explosive charges within State right of way is prohibited. 10. Permittee shall provide for the safe passage of pedestrians. 2