Laserfiche WebLink
Alaniz, John <br /> From: np.cutterlumberproducts@gmail.com <br /> Sent: Tuesday, March 31, 2020 9:54 AM <br /> To: Alaniz, John <br /> Subject: RE: HW CHECKLIST <br /> Yes, CAM17 was the original request and this is what is being <br /> Done currently. I spoke with the Lab and explained what we needed <br /> Again for good measure. <br /> Will advise once we have results. <br /> From:Alaniz,John <jalanizl@sjgov.org> <br /> Sent:Tuesday, March 31, 2020 9:05 AM <br /> To: 'np.cutterlumberproducts@gmail.com' <np.cutterlumberproducts@gmail.com> <br /> Subject: RE: HW CHECKLIST <br /> Hi Nick, <br /> Thank you for the update. <br /> Just to clarify: <br /> The lab is still doing the CAM 17? As we discussed earlier, that is the first test usually done to determine if other tests <br /> are needed. If the results are high enough,then the STLC and TTLC could become a concern. <br /> Also, for your information, I have seen labs use the incorrect CAM 17 testing method. The testing method used is <br /> usually for solids but can change depending on the sample taken (example-if it is a liquid with very little suspended <br /> solids). <br /> Thank You, <br /> John Alaniz <br /> REHS <br /> San Joaquin County <br /> Environmental Health Department <br /> 1868 E Hazelton Avenue <br /> Stockton, California 95205 <br /> Phone: (209)468-3147 <br /> Fax: (209)468-3433 <br /> Please note, my email address has changed to jalanizl@sjgov.org. <br /> From: np.cutterlumberproducts@gmail.com [mailto:np.cutterlumberproducts@gmail.com] <br /> Sent:Tuesday, March 31, 2020 8:44 AM <br /> To:Alaniz,John <jalanizl@sigov.org> <br /> Subject: RE: HW CHECKLIST <br /> Just was informed, Lab had done wrong test and is <br /> i <br />