COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

E. PROJECT HEALTH AND SAFETY TEAM: Team Members(list) Project Manager: Lia Holden Public Information: Lia Holden,Suzanne McClurkin-Nelson,William McDonald Antea Group on-site Personnel:(On-site personnel Renee Ransom are responsible for Antea Group site health and safety.) Antea Group Site Safety Officer: Renee Ransom PROJECT TEAM TRAINING RECORDS Name 40 Hr Training Date 8-Hr Refresher Date Site Supervisor e-Railsafe and Training Date Contractor Onrail Training Lia Holden 07/2004 03/2012 02/2008 11/2011 Renee Ransom 02/2009 03/2012 03/2011 11/2011 ADDITIONAL UPRR REQUIRED TRAINING e-RailSafe training will be completed by each person prior to entering the Site. Each employee and subcontractor shall have on their person the e-RailSafe Identification Card,which is prominently displayed and current.Subcontractors visiting the Site for a short time period may have the e-RailSafe requirement waived upon approval of the UPRR Environmental Site Manager's approval. F. PERIMETER ESTABLISHMENT: Map/Sketch attached: YesNo Site secured: Yes No Perimeter identified: YesIsNo Zone(s)of Contamination identified: Yes No X Prevailing wind direction,if known: EMERGENCY MEETING SITE: To be determined at start of each work day and dependent on wind direction. EVACUATION ROUTES/PROCEDURES: To be determined at start of each work day and dependent on wind direction. G. WORK ZONES: An exclusion zone, contamination reduction zone and support zone will be identified for each site or site activity. The Exclusion Zone will be marked with yellow CAUTION tape, barricades and\or cones (each cone must be a minimum of 3-ft in height-not including the flag extension, total min. 42-inches), as needed. No person will be allowed in the exclusion zone or contamination reduction zone without approval from the Antea Group Site Safety Officer.