Laserfiche WebLink
GEOMATRIX <br /> Constituent Method <br /> Sulfolane APPL Method <br /> EDB/DBCP EPA 8011 <br /> Total Alkalinity SM2320b <br /> Dissolved Manganese EPA 200.7 <br /> Dissolved Iron EPA 200.7 <br /> Dissolved Organic Carbon EPA 415.1 <br /> Table 3 is a sampling and analysis plan for Phase 1 EMP. As part of a quality assurance project <br /> plan(Appendix A),blank and duplicate field samples will be collected for selected analyses <br /> and the laboratory will provide analytical results of quality assurance analyses in accordance <br /> with the specified methods. <br /> Geomatrix will review the Phase I EMP data for evaluating the extent and nature of the release. <br /> If the available data are insufficient to characterize the nature and extent of the dissolved solids <br /> release, an additional phase of sampling may be proposed(Phase II EMP). If the available data <br /> characterize the nature and extent of the dissolved solids release, Simplot will proceed with an <br /> EFS to describe/evaluate"the corrective action measures that could be taken"to achieve <br /> WQPS (Section 20420). <br /> 5.1.1 Exploratory Borings <br /> Geomatrix plans to advance nine borings at the approximate locations identified in Figure 3. <br /> The basic protocols for field activities are included in Appendix A. Select and site-specific <br /> procedures are described in the following sections. <br /> Permits <br /> Prior to any subsurface work, Geomatrix will obtain the appropriate permits from the <br /> San Joaquin County Department of Environmental Health. Since all of the proposed locations <br /> occur on Simplot property, encroachment permits are not anticipated to be required. <br /> Underground Utilities <br /> At least 2 business days prior to the initiation of the advancing of borings, Geomatrix will <br /> notify Underground Services Alert as required by law. Additionally, Geomatrix will contract <br /> with a private utility locator to clear each boring location. All boring locations will be also <br /> cleared by a Simplot representative. Finally, each boring location will be hand-augered to a <br /> minimum depth of 5 feet bgs. <br /> 1:`:6000s\6741.000'Archiv66741-13.doc 8 <br />