COMPLIANCE INFO_FILE 2 - Laserfiche WebLink

Home Browse Search

(6) The results of such analyses. c. Samples and measurements taken for the purpose of monitoring shall be representative of the monitoring activity. The Permittee shall maintain consistent records of sampling and measurements, such that data from separate sampling and measuring events may be readily compared. All sampling and monitoring plans submitted to the Director shall demonstrate that the methods used to select and obtain samples and measurements will yield results that are representative of the monitored activity . The method used to obtain a representative sample of the material to be analyzed must be the appropriate methods from Appendix I of 40 CFR Part 261. Laboratory methods must be those specified in Test Methods for Evaluating Solid Waste• Physical/Chemical Methods, SW-846, November 1986, or any later edition which may be published from time to time. If no laboratory method exists in this reference for one or more parameters which the Permittee is required to measure pursuant to this Permit, the Permittee shall use an appropriate method specified by Standard Methods of Wastewater Analysis, 16th edition, 1985, or any later editions which may be published from time to time; or an equivalent method approved by the Director. [40 CFR 270.30(j ) (1) ] 10. Reporting Planned Changes and Anticipated Noncompliance a. The Permittee shall give notice to the Director as soon as possible of any planned physical alterations or additions to the permitted facility or activity. [40 CFR 270.30(l) (1) ] b. The Permittee shall give advance written notice to the Director of any planned changes in the permitted facility or activity which may result in noncompliance with Permit requirements. [40 CFR 270.30(1) (2)] 11. Certification of Construction or Modification Except as provided in 40 CFR 270.42, the Permittee may not store hazardous waste in a modified portion of Building 804A until the Permittee has submitted to the Director, by certified mail or hand delivery, a letter signed by the Permittee and a registered professional engineer stating that Building 804A has been modified in compliance with the Permit; and a. The Director has inspected the modified Building 804A and finds it is in compliance with the conditions of the Permit; or b. The Director has either waived the inspection or has not. within 15 days notified the Permittee of his intent to inspect. [40 CFR 270.30(1) (2) ] II.6