Laserfiche WebLink
PP-1005-TBP <br /> Our debris bucket is designed to keep <br /> debris such as leaves,paper,er,a etc. out of <br /> the filter area of the bucket,which <br /> can <br /> � <br /> then be easily <br /> removed y o ed and cleaned. The <br /> pump is for the removal of any water or <br /> other liquid that would be collected in the <br /> vapor bucket.The debris bucket for the <br /> fill side(pump not included) is part# <br /> PP-1005-TB <br /> F 4X4 <br /> One of our newest products is our <br /> 4"x 4"threaded riser adaptor. Its <br /> purpose is to produce a true machined <br /> sealing surface at the top of a field <br /> threaded riser pipe. This eliminates <br /> leaking due to improper"field made" <br /> Patent#6,840,549 Bt riser nipples. The use of this adaptor <br /> adds 13/4"to the length of the riser pipe. <br /> -1600 <br /> The M-1600 is an alignment bracket <br /> designed to keep the riser pipes supported <br /> at the proper separation <br /> Warning:The M-1600 is not designed <br /> to adjust the riser pipes to any measurement <br /> other than what the bung configuration is. <br /> 48-409 <br /> The pipe support was designed to <br /> support the fiberglass piping in an <br /> woo orderly manner and not have to remove <br /> the supports after backfilling. <br /> 3732 Electro Way • Redding • CA • 96002 • Voice: 530-223-7400 • Fax: 530-223-7418 <br /> www.phil-tite.com <br />