Laserfiche WebLink
EMERGENCY PUMIP AND DISPENSERESHUT OFF CHECIGISr <br />FACILITY # 2-133 DATE 3— <br />ADDRESS <br />1. Authorize one dispenser of each product at the ARCOmatic. Go to dispenser of authorized <br />product and turn on the handle. <br />2. Turn emergency switch, independent of ARCOmatic switch, to stop position.Note- each <br />ernMena stop switch must be tested indenendentl� <br />3A. Tokheim Dispensers Only . <br />Check relays in (1) power centers and (2) turbine relay boxes to verify that they are open and <br />that power to the turbines is off. <br />Open turbine sumps and verify turbines are oft. Note results below. <br />3B. Gilbarco & Wayne Dispensers Only <br />Verify at least one dispenser of each product will shut off. Check turbine relay boxes to verify <br />that they are open and that power to the turbines is off. <br />Open turbine sumps and verify turbines are off. Note results below. <br />4. ARCOmatic Sites Only:-----INCR's do not have emergency stop switches on console <br />Authorize one dispenser to verify that dispenser power shuts down and/or turbine power shuts <br />down. Repeat procedure #4 for each dispenser and note results below. <br />STOP SWITCH SHUTS DOWN COMMENT/REPAIRS <br />TURBINE DISPENSER <br />(Y/ (Y/N) <br />ARCOmatic <br />OUTSIDE WALL <br />INSIDE STORE <br />OTHER ' <br />5. Turn emergency switch back to run position. <br />6. Put station back in operation. <br />7. Install turbine circuitbreakerand emergency stop decals supplied by ARCO if necessary. <br />CONTRACTOR :5 fq / / C �_ SIGNATURE.� <br />Comments: <br />